Welcome: Phoenix New Materials Co., Ltd.
info@phrope.com 0532-82190189

UHMWPE Aquaculture Cage Netting - Knotless Raschel Panels

Knotless Raschel-knit UHMWPE net panels for marine fish cages and aquaculture containment. Standard twine diameters 1.5-4.0 mm, with mesh size 2a options from 25 to 100 mm. Custom panel dimensions and specifications available.

EMAIL

Knotless UHMWPE netting for aquaculture cages

Phoenix UHMWPE aquaculture cage netting is manufactured from gel-spun ultra-high molecular weight polyethylene yarn using Raschel warp-knitting technology. These knotless net panels are intended for fish containment and project-specific marine cage applications. Phoenix combines in-house yarn, rope and netting production to support material and construction selection.

A knotless structure avoids conventional tied knots and their local bulk. Its suitability depends on the complete panel construction, seams, reinforcement and attachment arrangement. Material strength alone does not establish cage reliability.

Standard net panel specifications

The following values are taken from the Phoenix UHMWPE Net Technical Data Sheet. Mesh size is expressed as 2a; confirm the measurement definition and tolerances when ordering.

ConstructionTwine diameter (mm)Mesh size 2a (mm)Breaking strength (N)Net weight (g/m²)
1600D × 51.525 / 35 / 40900170–290
1600D × 71.840 / 501,250190–250
1600D × 102.050 / 55 / 602,000230–280
1600D × 122.455 / 60 / 652,200250–310
1600D × 152.760 / 65 / 702,700300–360
1600D × 203.265 / 70 / 75 / 803,600350–450
1600D × 254.070 / 75 / 80 / 1004,200330–530

All listed constructions are knotless. The TDS references ISO 1806 for mesh breaking strength and describes the test as single mesh node. Confirm the applicable test procedure and batch report for the selected specification. Breaking strength is not a safe working load or a cage-system load rating. Weight varies with mesh size and construction.

UHMWPE material properties

  • Raw material: gel-spun UHMWPE fibre; standard yarn: 1600 D.

  • Yarn tenacity: ≥34 cN/dtex.

  • Density: 0.97 g/cm³; the unweighted material floats.

  • Water absorption: <0.01%.

  • Elongation listed in TDS: 3–4%; confirm the test basis for design use.

  • Melting point: 130–136°C. This is not an allowable operating temperature.

  • Standard colour: blue; custom colours and panel dimensions on request.

The TDS lists UV stabilisation as Grade A. Request the relevant exposure method and retained-strength data where a defined outdoor service life is required. No fixed service-life guarantee is inferred from this grade.

Marine fish cage netting applications

Project applications include circular floating cages, steel-frame cages and outer predator-barrier nets. Mesh opening must suit fish size and containment requirements. Predator exclusion also depends on species, spacing, net construction and the complete barrier arrangement.

For offshore aquaculture nets, review current velocity, wave exposure, net deformation, biofouling allowance, installation loads and cleaning methods. A suitable strength-to-weight ratio can support handling and construction choices, but drag and maintenance outcomes require project-specific evaluation. UHMWPE netting still requires inspection, cleaning and repair planning.

Specify the net around the farm

Send cage geometry, panel dimensions, fish species and size, mesh requirement, current and wave conditions, attachment details and cleaning practices. For submerged cages, include depth and handling arrangements for engineering review. Any cage depth or environmental rating must be established for the complete system.

Pay particular attention to seams, reinforced edges, contact abrasion and interfaces with support ropes and cage frames. Inspection criteria and replacement decisions should reflect measured condition and operating exposure.

Ordering and technical documentation

Custom mesh size, denier and dimensions are available on request. The TDS lists a sample minimum of one panel, bulk MOQ of 100 m², indicative lead time of 15–25 working days, roll packing on cardboard tubes and FOB Qingdao shipment. Confirm availability and delivery timing with your quotation. A COA and batch test report are listed as supply documentation.

For a UHMWPE knotless netting quotation, contact info@phrope.com with your drawings and operating requirements. Ask for the latest TDS and specification-specific test documentation.

Technical values provide general guidance and may vary with testing conditions. Final specifications, tolerances and acceptance requirements must be agreed for each order. This page covers netting panels; it does not certify a complete cage or mooring system.


No previous NEXT:Offshore Aquaculture Netting

INQUIRY